Goro Puppet - Fur mock-up and Tests

I was in a fey mood and decided to try out the pattern pieces I cut. I have some silver minky and just cut and stitched it all together. Then put it on the model. Here are the results.

This is the good side.

Here's what it looks like with the jawset.

The left side has too much puckering around the eye.

I'm balancing the jaws on my fingers.

And with a nose and eyes.

Thee eye holes are too small.

But it is looking cute.

Here's naked face with the eyes! Looks much happier and livelier!

The 3d lids had a little lever on them but they would not fit inside the head. So I cut the levers we'll see how the mechanics turn out. I'm starting to plot out the internal bit with foam.

Comments

Hakama Series - Side Opening Covers/Pockets

The side openings on hakama can feel a bit exposing if you're not wearing a full kimono underneath or perhaps you just can't stand to be without pockets! While these things are not necessarily historically accurate for the area, you can make it work. Modesty Panels These will be panels of fabric that hang from your waist at your sides where the openings of the hakama are. You can choose to attach these to the belts (himo) of your hakama or to make your own waistband. You can use any kind of cloth but the idea is to use any left over clothe from making your hakama. But if you want different colors or prints go for it. You will cut a rectangle with rounded corners that is 16" tall and about an inch wider than your side openings (sasahida). To keep it from fraying, either use a serger or overlock machine to finish the edges except at the top. Alternatively, use a zig-zag stitch on your regular sewing machine all around the edges except the top.. Make a waistband fro...

Kimono Series: Measure & Cutting the Kimono

This is the primary benefit to making your own kimono, having it tailored to you! In this post, I will go over the following: Body Measurements you need Names of the Panels and their dimensions Calculating Fabric needs Tailoring points And a few tips and resources With measurements there are major and minor measurements. Focus on the major measurements for calculating fabric amount and the size and shape of the panel pieces. The minor measurements are mostly for construction so you put the pieces together correctly and they fall in the right place for your body. Lets start with the measurements you need to take on the body. Body Measurements There are only 3 body measurements for kimono, although they will differ slightly between a masculine and feminine kimono. You need: Yuki - a measurement taken from the spine at the base of the neck to the shoulder joint, then to the wrist while holding the arm at a 45° angle. (You CAN T-Pose it but it is a little less accura...

Costume Journal: Wendigo/Not-Deer Costume

So spooky! The idea for this costume came from my brainstorming on what to wear for office Halloween. I do have a couple of already made costumes I could use that I haven't worn yet, but I was hit with this idea when I remembered that I 3D printed a fox skull mask and found my "shaggy" faux fur fabric. I have so much scrap material around that I'm just "saving for a rainy day". Well, the rainy day has come and I wish to use up my scraps and clear out some of my closet. So...the spirit of greed and starvation the Wendigo. Components The costume was in part inspired by another person's 3D kit on Thingiverse . It used a variation of the fox skull, added antlers and long claws. So, what I'm borrowing from that design is: Skull Mask Antlers long Claws Fur Hood Where I will differ is I'm using this as an excuse to finally make those Hoof Boots I wanted. I am also making the cloak part more like a Ring Wraith or Dementor cloak. Body long-sleeved shi...

Modesty's Costume Closet

Search This Blog