Skip to main content

Cosplay Knitting: Demon Slayer Uniforms

 There's nothing like a show with uniforms to make you absolutely furious that no one seems to wear them according to regulation. Skirts at knee level, keep those shirts buttoned up and tucked in. (I'm not having flashbacks to school life from pre-school through my senior year of high school. Honest!) Anyway! While the basics of the Demon Slayer Corp uniforms are the same, everyone has to have a big personality and wear it differently. 

I don't want to even be seen near you!

Standard Uniform

So the standard uniform includes hakama (wide-legged trousers) and a long sleeve button-up shirt with a mandarin collar and the kanji for "destroy" on the back. Actually, I think it's two layers of shirts, one white and one black. (But this is costuming, so of course, it's easier to make it one piece!) The female variation of the uniform allows for a skirt instead of hakama. Hashira uniform tops have gold buttons while other ranks have white buttons. The number is based on torso height but it's usually 3 - 4 buttons. 

Deviations

There are a couple little deviants for the uniform, of course. Generally, it has to do with sleeves and how many buttons are used, and button color. The deviants include: Tengen, Sanemi, Mitsuri, Muichiro, and Gyomei. 

Tengen - no sleeves, but buttoned up properly. 

Gyomei - arms too big for sleeves so they're rolled up, halfway buttoned up

Sanemi - no sleeves and open shirt...very rude. 

Muichiro - Long billowing sleeves and loose hakama 

Mitsuri - falling out of her uniform. Unbuttoned and a short skirt

Knitting Suggestions

So my basic suggestions for knitting the uniforms are to knit wide legged pants, joggers, or a knit skirt, and either a mandarin collared cardigan sweater or a mock turtleneck pullover. The kanji on the back would look best with Intarsia or duplicate stitches. Any portions that are white would be a color change. For example, on a turtle neck, you might start in white then switch to black after a few rows. You would need all the basic skills for sweater knitting. 


For deviants you'd either not include sleeves or make them capped sleeves and just leave portions unbuttoned. Although for Mitsuri, if you'd prefer something slightly more secure, supportive and modest, you could make a keyhole sweater or have a window portion. (Or just give that sweet girl a uniform what fits. Although, I do enjoy the backstory of her first getting the uniform. Mitsuri embodies my vibe and I would also be in the corps to find a man. Priorities.) 

The yarn you would use will depend on how warm you want it to be. Also most of the patterns I will suggest have yarn types. Thankfully, everyone uses a mix of black and white on the uniforms. Although in the anime they use "artist's black" instead of a pure black. For this I would stick with black yarn. No need to stress about color...there will be plenty things to cry about. 

Patterns I Found

Here are some free and for sale patterns I suggest using for the black uniform.

Hakama Patterns

I mean male characters for this one, but yes many of these are men's sweater patterns.

Women's Shirts

Again mostly for the female characters but these are pretty much all women's patterns. 
Make your own chart from it.

And that should cover most things about the uniforms. Hope this was of use or at the very least interesting.
Labels:

Comments

Post a Comment

Popular posts from this blog

Kimono Series: Measure & Cutting the Kimono

This is the primary benefit to making your own kimono, having it tailored to you! In this post, I will go over the following:  Body Measurements you need Names of the Panels and their dimensions Calculating Fabric needs Tailoring points And a few tips and resources With measurements there are major and minor measurements. Focus on the major measurements for calculating fabric amount and the size and shape of the panel pieces. The minor measurements are mostly for construction so you put the pieces together correctly and they fall in the right place for your body. Lets start with the measurements you need to take on the body.  Body Measurements There are only 3 body measurements for kimono, although they will differ slightly between a masculine and feminine kimono. You need:  Yuki  - a measurement taken from the spine at the base of the neck to the shoulder joint, then to the wrist while holding the arm at a 45° angle. (You CAN T-Pose it but it is a little less accura...
Post a Comment
Read more

Hakama Series - Side Opening Covers/Pockets

The side openings on hakama can feel a bit exposing if you're not wearing a full kimono underneath or perhaps you just can't stand to be without pockets! While these things are not necessarily historically accurate for the area, you can make it work.  Modesty Panels These will be panels of fabric that hang from your waist at your sides where the openings of the hakama are. You can choose to attach these to the belts (himo) of your hakama or to make your own waistband.  You can use any kind of cloth but the idea is to use any left over clothe from making your hakama. But if you want different colors or prints go for it.  You will cut a rectangle with rounded corners that is 16" tall and about an inch wider than your side openings (sasahida). To keep it from fraying, either use a serger or overlock machine to finish the edges except at the top. Alternatively, use a zig-zag stitch on your regular sewing machine all around the edges except the top..  Make a waistband fro...
Post a Comment
Read more

Becoming a Kitsune: Tail Design Considerations

The key element of a kitsune character is the tail (or tails in most cases). You'll need to determine what you want the tail to look like so you can determine the best method of attachment. The primary consideration for attachment is weight . The things that affect weight are size and materials. So let's get into it! Tail Shapes These are the common shape profiles I see for making kitsune-style tails whether it's a fur tail or crystal or unnatural.  A: Tube Sock - a uniform girth and rounded end. Close to reality.  B: Pointed Tube - a uniform girth that tapers at the tip.  C: Squirrel Style - wider in the middle rounded tip. Very much like an oval shape.  D: Pointed Barrel/Paintbrush  - the tail gets wider in the middle and tapers at the tip and at the top.  Tail Poses Another aspect of tail shape is how you want it to pose or hold in place.  Limp - a relaxed tail that hangs down loosely. It doesn't hold any pose.  C Curve - the tail is arche...
Post a Comment
Read more