Skip to main content

Cosplay Knitting: Demon Slayer Belts

Hello again. I'm still on this Demon Slayer Cosplay Knitting kick. But perhaps this will be more accessible. Maybe. I've been burned before. I need to rest my brain and try something a little easier to comprehend than socks. 

For real, let's talk about knitting belts, obi, and other waist-related accessories.  Thankfully, all demon slayers have a uniform belt. I have not found one that has any special doo-dads or designs. And if there are, don't tell me about them. 

Uniform Belts

Are the trouser loops white? Who dressed you?

These are white belts about 1.5 - 2.5 inches thick (relatively speaking). The buckle is a rectangular shape, and it goes into white loops...which kind of doesn't make sense since the pants are black. The hell do those loops come from? I know belts sometimes have a sliding loop but do they have two!? (Shhh...don't ask questions...it upsets us.) Anyway, knitting would basically consist of knitting a length of fabric that could go around your waist. For extra fun, you may attach a loop of fabric (a sword frog to be technical) to hold the sword on the inside of the belt. (Because dammit Kyojuro...that sheath is NOT going to stay on once the sword is drawn. Although maybe that's the point. SHUT UP!) The buckle would have to be purchased or 3D printed. You'd want to get one with a post in the middle, then either knit directly on or attach after you've finished knitting. There's not really any particular pattern you'd need, but if you want some guidance on knitting a plain belt, these patterns may offer some good advice for making belts and attaching buckles. 

Obi Belts 

Thank goodness the back is hidden by the coat!

I know it's just Obi. But there are a couple ways to approach this in knitting. 
  1. Make a double-knit obi length of fabric. You'll be knitting until the end of time, btw. 
  2. Make a wrap belt. 
  3. Make a belly warmer or haramaki
These belts would suit characters that do NOT wear the uniform, such as Nezuko, Lady Tamayo, Ruka Rengoku, Female Disguised Muzan and cross-dressed Tanjiro, Zenitsu, and Inosuke. You could have a lot of fun making obi inspired by characters, but I'm leaving that to you. I'm not making charts! 

Suggested Patterns: 

The patterns mostly use the following techniques: 

Fur Belt

Technically a belt I guess. 

Inosuke has been left out of most of these knitting projects since he wears so little. However, the fur belt CAN BE KNIT! believe it or not. You would be using faux fur yarn. It can be made from patterns of a belly warmer belt, skirt, or shoulder wrap. 

And that about wraps it up for this post. Pretty low-key compared to the other posts. However, I'll continue to torture myself...I mean...research how to knit other costumed aspects. I'm also researching a couple other anime series to potentially knit. Wish me luck...

Labels:

Comments

Post a Comment

Popular posts from this blog

Kimono Series: Measure & Cutting the Kimono

This is the primary benefit to making your own kimono, having it tailored to you! In this post, I will go over the following:  Body Measurements you need Names of the Panels and their dimensions Calculating Fabric needs Tailoring points And a few tips and resources With measurements there are major and minor measurements. Focus on the major measurements for calculating fabric amount and the size and shape of the panel pieces. The minor measurements are mostly for construction so you put the pieces together correctly and they fall in the right place for your body. Lets start with the measurements you need to take on the body.  Body Measurements There are only 3 body measurements for kimono, although they will differ slightly between a masculine and feminine kimono. You need:  Yuki  - a measurement taken from the spine at the base of the neck to the shoulder joint, then to the wrist while holding the arm at a 45° angle. (You CAN T-Pose it but it is a little less accura...
Post a Comment
Read more

Hakama Series - Side Opening Covers/Pockets

The side openings on hakama can feel a bit exposing if you're not wearing a full kimono underneath or perhaps you just can't stand to be without pockets! While these things are not necessarily historically accurate for the area, you can make it work.  Modesty Panels These will be panels of fabric that hang from your waist at your sides where the openings of the hakama are. You can choose to attach these to the belts (himo) of your hakama or to make your own waistband.  You can use any kind of cloth but the idea is to use any left over clothe from making your hakama. But if you want different colors or prints go for it.  You will cut a rectangle with rounded corners that is 16" tall and about an inch wider than your side openings (sasahida). To keep it from fraying, either use a serger or overlock machine to finish the edges except at the top. Alternatively, use a zig-zag stitch on your regular sewing machine all around the edges except the top..  Make a waistband fro...
Post a Comment
Read more

Becoming a Kitsune: Tail Design Considerations

The key element of a kitsune character is the tail (or tails in most cases). You'll need to determine what you want the tail to look like so you can determine the best method of attachment. The primary consideration for attachment is weight . The things that affect weight are size and materials. So let's get into it! Tail Shapes These are the common shape profiles I see for making kitsune-style tails whether it's a fur tail or crystal or unnatural.  A: Tube Sock - a uniform girth and rounded end. Close to reality.  B: Pointed Tube - a uniform girth that tapers at the tip.  C: Squirrel Style - wider in the middle rounded tip. Very much like an oval shape.  D: Pointed Barrel/Paintbrush  - the tail gets wider in the middle and tapers at the tip and at the top.  Tail Poses Another aspect of tail shape is how you want it to pose or hold in place.  Limp - a relaxed tail that hangs down loosely. It doesn't hold any pose.  C Curve - the tail is arche...
Post a Comment
Read more