Skip to main content

Costume Journal: Wendigo/Not-Deer Progress

 ðŸŽƒ Halloween creeps up quicker than we like! We are halfway through September, and that means all the stores are finally displaying their spooky supplies. 

This year for Halloween, I'm going for a scary costume, the wendigo or not-deer inspired costume that will also be a stash buster. While I have made some purchases for the costume, most of it will be made from leftover scraps from other projects. 

3D Printed Parts


The 3D printed parts include: 
  • Skull Mask
  • Claws
  • Antlers + Headband
  • Raven skull necklace
These have all been printed and assembled for the most part. The mask has elastic on it to keep it on, the antlers detach from the headband so it can be easier to insert them through the fur hood. I'm using tiny rubber bands to help keep the claws on my gloves. 

Boots

I ended up purchasing these boots from ChaosCostumes. The hoof size compared to my 3D printed buck is much larger. Safety matters! The shoe is a tad too big, so I have purchased some heel pads and a detachable ankle strap. 

Sewing Bits

I printed out a hood pattern and got a tutorial for the cloak. I'm using the leftover shag fur from the Armoress costume. I'm mixing black, brown, and white leftover fabrics to make the cloak and belt. 

I will probably just need one weekend to do all the sewing I plan on doing. So this is kind of a chill time for me. I don't feel as pressured or scrambled. 

Stretch Goals

I mentioned a few ideas for special effects, such as glowing eyes and a sound speaker in my previous post. That is still on the table, but I think I do have enough with what I got. I have to haul the costume into work after all. I'm not going to wear the hoof boots into and out of work. They're not safe for driving in.  
Labels:

Comments

Post a Comment

Popular posts from this blog

Kimono Series: Measure & Cutting the Kimono

This is the primary benefit to making your own kimono, having it tailored to you! In this post, I will go over the following:  Body Measurements you need Names of the Panels and their dimensions Calculating Fabric needs Tailoring points And a few tips and resources With measurements there are major and minor measurements. Focus on the major measurements for calculating fabric amount and the size and shape of the panel pieces. The minor measurements are mostly for construction so you put the pieces together correctly and they fall in the right place for your body. Lets start with the measurements you need to take on the body.  Body Measurements There are only 3 body measurements for kimono, although they will differ slightly between a masculine and feminine kimono. You need:  Yuki  - a measurement taken from the spine at the base of the neck to the shoulder joint, then to the wrist while holding the arm at a 45° angle. (You CAN T-Pose it but it is a little less accura...
Post a Comment
Read more

Hakama Series - Side Opening Covers/Pockets

The side openings on hakama can feel a bit exposing if you're not wearing a full kimono underneath or perhaps you just can't stand to be without pockets! While these things are not necessarily historically accurate for the area, you can make it work.  Modesty Panels These will be panels of fabric that hang from your waist at your sides where the openings of the hakama are. You can choose to attach these to the belts (himo) of your hakama or to make your own waistband.  You can use any kind of cloth but the idea is to use any left over clothe from making your hakama. But if you want different colors or prints go for it.  You will cut a rectangle with rounded corners that is 16" tall and about an inch wider than your side openings (sasahida). To keep it from fraying, either use a serger or overlock machine to finish the edges except at the top. Alternatively, use a zig-zag stitch on your regular sewing machine all around the edges except the top..  Make a waistband fro...
Post a Comment
Read more

Becoming a Kitsune: Tail Design Considerations

The key element of a kitsune character is the tail (or tails in most cases). You'll need to determine what you want the tail to look like so you can determine the best method of attachment. The primary consideration for attachment is weight . The things that affect weight are size and materials. So let's get into it! Tail Shapes These are the common shape profiles I see for making kitsune-style tails whether it's a fur tail or crystal or unnatural.  A: Tube Sock - a uniform girth and rounded end. Close to reality.  B: Pointed Tube - a uniform girth that tapers at the tip.  C: Squirrel Style - wider in the middle rounded tip. Very much like an oval shape.  D: Pointed Barrel/Paintbrush  - the tail gets wider in the middle and tapers at the tip and at the top.  Tail Poses Another aspect of tail shape is how you want it to pose or hold in place.  Limp - a relaxed tail that hangs down loosely. It doesn't hold any pose.  C Curve - the tail is arche...
Post a Comment
Read more